MADRIX STELLA, Руководство пользователя, Страница: 10 / 115

[Part 1] Overview
//10
www.madrix.com
MADRIX STELLA User Manual
§
2] Connect MADRIX STELLA and your computer to the same Ethernet network.
§
3] Assign correct network settings for your computer in the operating system.
[Recommended default settings: IP address 10.0.0.1 / Subnet mask 255.0.0.0]
§
4] Open your web browser and enter the IP address of MADRIX STELLA. The built-in web configuration tool will
be launched.
[You can find the default IP address on the side of the device.]
§
5] Click Reset
Learn more »
Web Configuration [Ethernet]
Technical support might ask you to perform the following special command in rare cases:
Load Bootloader Only
§
1] Disconnect all connections from the device [power, data, DMX].
§
2] Use a suitable tool to press the reset button [between DMX 1 and 2].
§
3] Continue to press the reset button and supply power again over 'Power' or USB.
§
4] Continue to press the reset button for 2 seconds.
§
5] If successful, the status LED Power is blinking green.
Initiate Poll
During normal operation, quickly pressing the Reset button sends an Art-Net PollReply and a MADRIX PollReply for
device discovery to the network.