MADRIX PLEXUS, Руководство пользователя

Страница: 97 / 299

MADRIX PLEXUS User Manual (English) 97
© 2013 inoage GmbH
'Soft Loop' creates an automatic loop by the software. First, enter a number of frames.
MADRIX will add these frames to the end of the Scene and therefore loops
towards the first frame of your Scene. A cross-fade is created. For example, if
your record was set to a frame rate of 33 FPS and you enter 66 here, two
seconds will be used for a loop towards the first frame.
'Follow' defines which Scene will be played after the currently selected Scene. Applicable
values are: 'No' , 'Next' , and a specific Scene ( '1' , '2' , '3' , etc ).
'Intensity' defines the brightness for the Scene in percent. Applicable values are: 0 - 100 .
'Speed' defines the tempo in percent. Applicable values are: 1 - 1000 .
'Port 1' defines if Port 1 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 2' defines if Port 2 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 3' defines if Port 3 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 4' defines if Port 4 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 5' defines if Port 5 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 6' defines if Port 6 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).
'Port 7' defines if Port 7 of the extension port will be triggered when the Scene begins to
play. Applicable values are: 'NO' , '0' (OFF), or '1' (ON).