MADRIX PLEXUS User Manual / Handbuch
50
© 2013 inoage GmbH
Navigate to the menu
'Network' 'Art-Net'
.
In this menu, the current settings regarding Art-Net, a network protocol for DMX-over-Ethernet,
are shown. More specifically, this menu contains the universes settings. Technically speaking Art-
Net universes range from 0 to 255, but they are displayed on the PLEXUS and in MADRIX from 1 to
256.
Art-Net -> DMX 1 shows which Art-Net universe is assigned to the first XLR port for
output
(DMX
1).
Art-Net -> DMX 2 shows which Art-Net universe is assigned to the second XLR port for
output
(DMX 2).
DMX 1 -> Art-Net shows which Art-Net universe is assigned to the first XLR port for
input
(DMX
1).
DMX 2 -> Art-Net shows which Art-Net universe is assigned to the second XLR port for
input
(DMX 2).
Please change the Universe according to your requirements or deactivate the option by choosing
Off.
Art-Net -> DMX 1 and Art-Net -> DMX 2 specify if incoming Art-Net data is routed to the
corresponding XLR port (DMX 1 or DMX 2) and which Art-Net universe should function as source
for each port. These settings should be activated if you want to connect your MADRIX PC to your
PLEXUS device using network cables. In Live Mode, you would then send data over the network to
the PLEXUS and the PLEXUS outputs the data to each XLR port, where your LED fixtures, LED
controllers, or LED drivers would be connected.
DMX 1 -> Art-Net and DMX 2 -> Art-Net specify if the corresponding XLR port is used for DMX-IN
and if those incoming values should be broadcasted to the Art-Net network and to which Art-Net
universe it should be sent. You can use this option to control the MADRIX software remotely (Art-
Net Remote), for example.
You may change the settings in this menu, on the device (
).
You can also configure the settings in the PLEXUS Configuration dialog using MADRIX. For more
information, see
.
For more information about Art-Net Remote, see the chapter
.
Содержание PLEXUS
