
18
CrossFire 8650/8651 UEM Guide to Operation, DOC-7090 v. 1.0
3. Console Configuration
Virtual Port Configuration
To configure a virtual port on an HSTR port select
Virtual Port Configuration
on
the
HSTR
Port Configuration
menu. If the HSTR port has more than one virtual
port, a list of the corresponding CRFs appears from which the virtual port must be
selected. The following menu appears:
Enabled
Sets the administrative state of the virtual port, possible values are
Yes
and
No
.
Default:
Yes
.
Status
Display only. Shows the current status of the virtual port. Can be one of the
following:
Value
Meaning
Admin down
The port or virtual port is disabled.
Waiting for port up
The virtual port is waiting for the
port to come up.
Up
The virtual port is up but not
forwarding.
Table 4. Virtual Port Configuration: Status Values
865x.Book Page 18 Wednesday, October 6, 1999 2:31 PM