Macurco DVP-120, Инструкция пользователя

Страница: 3 / 48

3
3.3.7.2 Zone Group Type 30
3.3.7.3 Timed Day Selection 30
3.3.7.4 Start Time 31
3.3.7.5 Stop Time 31
3.3.7.6 Sensor Selection 31
3.3.7.7 Rising Trip Point 31
3.3.7.8 Falling Trip Point 32
3.3.7.9 Multiple Sensor Mode 32
3.3.7.10 Multiple Sensor Quorum 32
3.3.8 Configure Signals Submenu 32
3.3.8.1 Alarm Signal Summary 32
3.3.8.2 Alarm Buzzer Signal 32
3.3.8.3 Alarm Horn Signal 33
3.3.8.4 Alarm Strobe Signal 33
3.3.8.5 Warning Signal Summary 33
3.3.8.6 Warning Buzzer Signal 34
3.3.8.7 Warning Horn Signal 34
3.3.8.8 Warning Strobe Signal 34
3.3.8.9 Trouble Signal Summary 34
3.3.8.10 Trouble Buzzer Signal 34
3.3.8.11 Trouble Horn Signal 35
3.3.8.12 Trouble Strobe Signal 35
4 Troubleshooting 35
4.1 System Status Light Flashing 35
4.1.1 Input Channel Trouble 35
4.1.1.1 No Sensor 35
4.1.1.2 Wrong Sensor Type 36
4.1.1.3 Sensor Trouble 36
4.1.1.4 Faulty Wiring 36
4.1.1.5 Resettable Fuse 36
4.1.2 Internal Controller Board Trouble 36
4.2 Timed ventilation problem 36
4.3 No Power 36
4.4 LCD Display unreadable 37
4.5 The Keypad does not respond (LCD shows KEYS LOCKED) 37
4.6 The Keypad does not respond after silencing an Alarm, Warning or Trouble 37
4.7 After a power failure 37
4.8 Modbus Application 37
5 Macurco Gas Detection products limited warranty 39
6 Appendix A Quick Set-Up 40