Taurus LAN User Guide
4. Depending on the capacity, rebuilding will take a while. Do not turn off the power or
interrupt the system in any other way. The HDD LED will be ON while the RAID
array is being rebuilt.
5. When finished, the HDD LED will turn off and the disk status will show that the
system is ready.
Note: Rebuilding the RAID system will take a while, depending on HDD capacity. Do not
turn off the power or interrupt the system in any other way during this process!
Note: Pressing the “Remove system data” or “Remove raid system” button will erase all
data! Only use this if you need to set up a different RAID system.
Page 27 / Chapter 3 - Web Configuration