Taurus LAN User Guide
Detailed View
For a detailed description on how each of these ports and buttons work, please refer to the
following chapters.
Front View
1. ON/OFF switch (blue when ON)
2. Ventilation holes
3. Status LEDs (see LED Indicators)
4. USB port (upstream)
5. USB backup button
Note: After turning on the power, it takes
about one minute for the system to boot.
LED Indicators
green
yellow
1. OS
2. HDD
1.
System
LED
2.
Activity
LED
ON = System ready
ON = Error (disk not found or RAID error)
OFF = System shut down
OFF = No disk activity
Blinking = System starting or shutting down
Blinking = Data access
Rear View
1. Slot for security lock
2. Smart fan for ventilation
3. Gigabit Ethernet port
4. Restart button
5. Reset button
6. USB port (upstream)
7. Power receptacle
Restart Button
Press and release this button for a
hardware reset. The device will restart
after you release the button.
Reset Button
Press and release this button for a software reset or when the Taurus LAN is powered up
and ready, press and hold this button for 5 seconds and then release it to reset all the
settings to factory default. All user accounts and groups will be erased!
Ethernet Port LED
The green LED on the left indicates the link connection and the LED on the right the speed.
green
yellow
green
yellow
Speed
10Mbps 1000Mbps
100Mbps
1
2
5
3
4
1
2
3
4
7
5
6
Page 2 / Chapter 1 - Introduction
