DigitalDoc5 Thermal Sensor Worksheet
Sensor
1
Placement
2
DD5
Fan
3
Computer Fan
4
Has RPM
Sensing?
5
1
Fan1
Factory Installed 40 x 40mm Fan
[ X ]
2
[ ]
3
[ ]
4
[ ]
5
[ ]
6
[ ]
7
[ ]
8
[ ]
Notes:
1.
This is the DigitalDoc5's Temperature Sensor Channel.
2.
Write down where you placed the Temperature Sensors. For Example -
Processor Heatsink.
3. These correspond to the DigitalDoc5's Fan Connectors. Fan 1 is the factory installed 40x40mm fan.
4. Write down which fan is connected to the corresponding DigitalDoc5 fan. For Example:
DigitalDoc5
Fan 2 -
Computer Fan:
120 MM Front Case Fan 5)
Check these boxes if you know the fan has RPM
Sensing. This will help you when setting up your DigitalDoc5 in
Chapter 3: Setting Up Your
DigitalDoc5.
5. If the fan does not have RPM sensing then don't check the box. You would then disable [dIS] this
fan's RPM Sensing Option in Set-Up Mode.
© Copyright 2000, Macpower Peripherals Ltd. All Rights Reserved. The information contained in this manual is believed to be accurate
and reliable. Macpower Peripherals Ltd. assumes no responsibility for any errors contained in this manual. Macpower Peripherals Ltd.
reserves the right to make changes in the specifications and/ or design of the DigitalDoc5, without notice. The diagrams contained in this
manual may also not fully represent the product that you are using and are there for illustration purposes only. Macpower Peripherals
assumes no responsibility for any differences between the product mentioned in this manual and the product you may have.
