Macpower & Tytech Digital Doc 5 Скачать руководство пользователя страница 20

 

20 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequently Asked Questions 

 

Q1. Why would I need a DigitalDoc5? 

 

The DigitalDoc5 is similar in 

function to that of the temperature gauge in any automobile. It monitors 
the temperature levels of up to four units per monitor. The temperature 
gauge in a car monitors the heat in the engine. It notifies the driver of 
overheating, and if the temperature continues to increase, will initiate the 
engine's cooling fan. If the driver does not have this warning, the engine 
will be damaged beyond repair. Likewise, the DigitalDoc5 monitors the 
temperature of up to eight different units per monitor, and safeguards the 
system from overheating, thus protecting your valuable data and 
hardware. 

 

Q2. What is the temperature range for the DigitalDoc5?

 

A

 

 

The 

temperature is displayed in Celsius or Fahrenheit degrees, in ranges of 0° 
C -100° C or 32° F-212° F. It is accurate to ± one degree. 
 

Q3. Does the DigitalDoc5 occupy a 5.25" single-slot?

 

A

 

– No, it will 

not take up any extra space. The DigitalDoc5 is merely a front panel, with 
a mounting bracket for 3.5" hard drive.  
 

Q4. Does the DigitalDoc5 require a battery?

 

A

 

– The DigitalDoc5 does 

not require a battery. This battery-free device receives power directly from 
the system, however the settings are memorized even when the 
computer is shut off.  
 

Q5. How many fans can the DigitalDoc5 monitor and control? 

A

 

– 

The DigitalDoc5 can control up to four can control up to 8 12 V fans, 
which are activated when the temperature exceeds the pre-set level.  
 

Q6. Can I keep the front-panel fans running continuously? 

A

 

–  Yes, 

though the fans normally are activated at a pre-set level, there is an 
option that will allow ALL fans to run continuously.  
 

Q7. Will the front-panel fans collect a great amount of dust?

 

A

 

– No, 

there is a filter in front of the fan that prevents the collection of dust. It can 
be easily removed and cleaned.  
 

Q8. What is the difference between DigitalDoc5 and a "baycooler"? 

A

 

– A "baycooler" is a front panel with a few fans that run continuously 

and are relatively noisy. It is simple in design, and easily copied by 
competitors. It also does not have a temperature gauge and temperature 
pre-set level, which are found in the DigitalDoc5. The DigitalDoc5 also 
has a sophisticated design, making it difficult for competitors to imitate it. 
 

Q9. What is the difference between DigitalDoc5 and the 
CompuNurse?

 

A

 

– The CompuNurse has an LCD display that shows the 

temperature of one unit in the device. The DigitalDoc5 shows the 
temperature levels of up to eight units. The CompuNurse also does not 
have temperature pre-set levels, monitor and control capabilities of the 
fans, and warning beep signals, all found in the DigitalDoc5.

 

 

Содержание Digital Doc 5
























Отзывы: