4. When the mast if fully engaged with the base, fit and fully tighten the mast locking hand wheel.
(
SAFETY NOTICE
- Ensure this is tight and locked into position before using the hoist). Remove
the strap and buckle retaining the spreader bar, the strap should be kept safe and should be
used if the hoist is folded for transport.
5. The foot pedal will open and close the legs simply by activating one side with your foot.
6. Ensure the emergency stop button (RED) on the control box is in the out position.
7. Confirm all cables are located and secure,
before operation the hoist ensure the strap &
buckle is removed.
Press the up button on the handset and confirm the boom rises. Your
hoist is now ready to use.
Ensure The Mast Is Fully
Seated In Position Before
Securing The Mast Locking
Hand Wheel
Mast Locking
Hand Wheel
Must Be Secure
Before Use
7
HOIST ASSEMBLY INSTRUCTIONS continued
