The
Assembled
Hoist Carton Contains:-
● Base fitted with 2 brake castors rear and 2 non‐brake castors front
● Mast and boom assembly
● 2 Point spreader bar complete with cover, and new M10 Bolt and Nylon Lock Nut
● Mast locking hand wheel
● Hand set
● Battery Pack
● Control box
● Actuator
● Battery charging cable.
1. Carefully open the box (
SAFETY NOTICE
- Do not use a sharp knife / edge) remove all loose
parts / excess packaging from the carton.
2. Carefully lift the hoist out of the carton (
SAFETY NOTICE
- 2 person lift recommended or
remove the end of the carton and wheel the hoist out). Place the hoist on a flat surface and
ensure the rear braked castors are locked.
3. Remove the black mast locking hand wheel from the top of the assembly, then carefully lift
the mast upright ensuring the mast drops into position. (
SAFETY NOTICE
- Please ensure both
hands are on the handles when lifting the mast into position, possible risk of finger trap).
4. Ensure all cables are routed correctly and are clear of the base / mast when lifting into
position.
6
HOIST ASSEMBLY INSTRUCTIONS
