11
Owner’s Manual
Owner’
s Manual
Press the desired Aux number in the V-POT CONTROL
area and use the channel V-Pots to set the channel Aux
send levels. All 12 Aux levels for a selected channel can
be set using the Touchscreen and QuickMix knobs by
pressing the
GRP/AUX QuickMix
button.
Aux Routing Examples
To send mic channel 1 to all monitors:
1. Press channel 1’s
SELECT
button.
2. Press the
GRP/AUX
QuickMix button.
3. Adjust the QuickMix knobs to set each Aux level.
To set one monitor mix:
1. Press the desired Aux number button in the AUX
SENDS area.
2. Use each channel’s V-Pots to set the mix.
2.5 Effects
Four effects processors can each use one of the fol-
lowing effects: reverb, reverb through gate, mono/stereo/
ping pong delay, chorus, and flange. The default effect
sends are Aux sends 9–12 but any Aux or Matrix sends
can be used. The effect returns are on the Returns bank.
1. Press the
ANLG
bank button.
2. Press
AUX SENDS 9
in the V-POT CONTROL area.
3. Turn channel 1’s V-Pot to 3:00 to set channel 1’s
level to Aux 9.
4. Press the
EFX QuickMix
button. The INTERNAL
EFX Touchscreen opens (top of Figure 2-10).
5. Touch the
Edit
button next to Chorus to edit its
parameters on its own screen (right of Figure 2-10).
6. Press the
RTRNS
bank button.
7. Speak into the mic and increase the Returns levels
(INT EFX 1L and INT EFX 1R) to set the desired
amount of effect.
Figure 2-9 AUX MASTER (top) and
6-BAND EQ (bottom) Touchscreens
Figure 2-10 Internal Effects (top) and
Chorus (bottom) screens
