background image

24

ONYX 4•Bus

ONYX 4•Bus

87. AUX SENDS 1-6

These 1/4" TRS output connectors provide balanced 

or unbalanced line-level signals for connecting to the 
inputs of effects devices or stage monitor amplifiers.

88. AUX SEND INSERTS

These 1/4" TRS jacks are for connecting serial effects 

such as compressors, equalizers, deessers, or filters. 
The insert point is after the mix amps, but before the 
Aux Send Masters and the AFL Solo switch (so you can 
hear the external processor when soloing the aux send). 
Refer to the description of the channel insert on page 22 
to see how to make this connection.

89. Power Receptacle

This is a standard 3-prong IEC power connector. Con-

nect the detachable linecord (included in the box with 
your Onyx 4•Bus) to the power receptacle, and plug the 
other end of the linecord into an AC outlet. The Onyx 
4•Bus has a universal power supply that can accept 

����������������������

�����������

�������

�������������

������������������

����������������������������������������������������������������������������������������������������������������������

������������������������������������������������������������������������������������������

������

������

������

������

������

������

������

������

������

������

��

������

��

������

��

������

��

������

��

������

��

������

��

������

��

������

��

������

��

������

������

������

������

������

������

������

������

������

��

��������

�������������

�������������

�����

��

�������

��

��

��

��

����

�������

�������

���������

���������

���������

���������

���������

���������

���������

����

����

���������

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

��

�� ��� ���

���

��

����

���������

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

��

�� ��� ���

���

��

�� ��� ���

���

��

�� ��� ���

���

��

�� ��� ���

���

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

����

���������

����

���������

����

���������

����

���������

����

���������

����

���������

��

�� ��� ���

���

����

���������

��

�� ��� ���

���

�����

����

���������

���

��

����

���������

���

��

����

���������

���

��

����

���������

���

��

����

���������

���

��

����

���������

���

��

����

���������

���

��

����

���������

���

�����

�������

�����

����

���

�������

���

�����

����

����

����

�������

�����

����

�������������������

�����

����

����

���

��

���

��

��������������

�����������

������������������

����������

����������

����������

���

����

�����

����������

�����

����

������

any AC voltage ranging from 100 VAC to 240 VAC. No 
need for voltage select switches. It will work virtually 
anywhere in the world. That’s why we call it a “Planet-
Earth” power supply! This also means that it is less 
susceptible to voltage sags or spikes, providing greater 
electromagnetic isolation and better protection against 
AC line noise.

90. POWER Switch

This one is self-explanatory. When the POWER switch 

is turned ON, power is supplied to the Onyx 4•Bus and 
the POWER LED on the front panel lights up.

Содержание ONYX 4-BUS





































Отзывы: