Owner
’s Manual
5
Owner’s Manual
Hookup Diagrams
PUSH FOR SETTINGS
MAX
OFF
MIX OUT
DIRECT OUT
DIRECT OUT
INPUT
INPUT
SPEAKER CONTROL
GAIN
GAIN
INPUT
GAIN
LINE
MIC
U
+50dB
OFF
LINE
MIC
+50dB
OFF
U
LIVE SHOW
SPEAKER VOICING
SPEECH
CL
UB
MON
LIVE
PUSH FOR SETTINGS
SPEAKER CONTROL
MONITOR POSITION
SPEAKER VOICING
MON
SPEECH
LIVE
CL
UB
CONFIGURATION
MEMORY
1 2 3 4 5 6
ABOUT
CH2 IN
LO-Z
HI-Z
LOCK PIN
1 2 3 4
BACKLIGHT
FRONT LED
RESET
OFF DIM
ON
OFF
ON
PUSH FOR SETTINGS
MAX
OFF
MIX OUT
DIRECT OUT
DIRECT OUT
INPUT
INPUT
SPEAKER CONTROL
GAIN
GAIN
INPUT
GAIN
LINE
MIC
U
+50dB
OFF
LINE
MIC
+50dB
OFF
U
DRM loudspeakers are the perfect tool for singer-songwriters touring the local coffee shops. Bring your favorite axe
and mic, DRM loudspeakers and cables and power cords.
In this example, a dynamic microphone is connected to the channel 1 input of a DRM212 loudspeaker, used for monitoring
purposes.
Now grab your axe and plug it directly into the channel 2 input. Or if you use effects, connect the guitar to the effects input
and another cable from the effects output to the channel 2 input.
A DRM215 loudspeaker will be used for the main PA. Simply connect a cable from the DRM212 monitor’s MIX OUT jack
to the DRM215 PA’s channel 1 input.
For the output, you will want to set a speaker mode, described in detail on page 12. For this type of setup, Live works well
for the main DRM215. Select the Monitor mode for the DRM212 monitor. Additionally, you will want to set the monitor’s
configuration > channel 2 input to Hi-Z to account for the guitar.
Singer-Songwriter Setup