9
1.2.6 Auto
Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right
limit and scan speed. You can set 5 scanning paths.
1.2.7 Auto
Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode
during auto pattern. For each pattern, the time should be less than 60 seconds. You can set 5
pattern paths.
1.2.8 Auto
Touring
Add addresses into a routine in a desired order and then set time and stop duration for each
address. The dome will begin an auto touring between these addresses. You can set 8 touring
paths.
1.2.9 Privacy
Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking
area will move with pan and tilt functions and automatically adjust in size as the lens zooms. You
can set 8 privacy masking zones (Depends on camera type).
1.2.10 Action on Alarm
This series speed dome support three alarm activation operations. There are 7 alarm inputs
(NO/NC). Alarms can be individually programmed to initiate an associated preset, scanning, or
tour when received. Dome will return to a previously programmed state after alarm
acknowledgement or to its previous position before alarm.
1.2.11 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180
degrees and repositions itself for uninterrupted viewing of any subjects that passes directly
beneath the dome.
1.2.12 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
z
Tilt and vertical engine check
z
Camera
diagnostics
z
Display dome information and diagnosis information such as address, protocol, baud
rate, type.
1.2.13 Day/Night Mode (B/W & Color Mode)
System supports auto/manual switch in low illumination. You can specify the switch time.
z
In the auto mode and photosensitive resistance mode, the camera can automatically
switch the CCD level according to the light change. In the manual mode, it can use the
menu or the button to realize the color display, black and white display, and schedule
switch. All the modes will have automatically activation operation on the IR light except
the camera auto mode.
z
This function works with the IR night vision function.
