31
IDLE FUNC
：
OFF
IDLE TIME
：
010MIN
IDLE ACTION
：
PRESET
PRESET NO
：
001
AUTO SCAN NO
：
001
CRUISE NO
：
001
PATTERN NO
：
001
SAVE
BACK
EXIT
There are maximum 8 privacy mask zones in 360 degrees. System supports two privacy zones
in one screen (Tilt angle ranges from 0 to 45 degrees.)
Note:
z
For security reasons, please set privacy zone a little bit larger than the privacy object size.
z
Each time, after modifications you need to move the cursor to SAVE button and then click
confirm button to get all setup activated. Otherwise, privacy zone may not move
correspondingly with the object.
Please enter privacy zone menu, now all the privacy zones are closed.
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to ACTIVATE.
Secondly, use left/right key to select ON mode. Now there is a privacy zone in the screen centre.
Thirdly, use PTZ to move camera so that privacy object fit well with screen centre.
Fourthly, move the cursor to RESIZE and then click left and right key to adjust privacy zone
direction and size.
Fifthly, move the cursor to SAVE and then click confirm button to exit.
z
PRIVACY
NO
：
Here is to set privacy mask zones. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. The value ranges from 1 to 8.
z
ACTIVATE: There are two settings: on and off. When activate function is on, the privacy
mask function will be activated and displays in the screen. When activate function is off, the
privacy mask function will be closed and the blank will not displayed in the screen.
z
RESIZE
：
It is to adjust the privacy zone size. Please continue pressing direction button to
widen or narrow zone size.
←
is to narrow the horizontal width and
→
is to widen the
horizontal width.
↑
is to widen vertical height and
↓
is to narrow the vertical height.
z
SAVE
：
Here is to save user setup.
z
DELETE: Here is to delete setup and restore default setting.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.7
Idle Motion
When there is no available command for specified time, dome automatically goes on the
previous set functions.
•
IDLE
FUNCTION
：
There are two modes ON/OFF. Please use left/right key to set.
