Mace Macealert Solo MAS-WA-SYS, Руководство пользователя

Страница: 20 / 24

20
iv
. d
eletinG a
r
emOte
c
OntrOl frOm the
w
ireleSS
a
larm
P
anel
If a Remote Control device is damaged or lost, it can be deleted from the system as follows:
Keys Description Note
1
(1234 or
4-digit PIN) +
You must be in STANDBY
mode before deleting a
Remote Control from the
Wireless Alarm Panel
*To make sure you are in
STANDBY
mode:
- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN
- Press
- The panel will display the below image while you are in
STANDBY
mode:
(One beep indicates that you entered a valid PIN, three beeps
indicate that an invalid operation was performed).
2
(1234 or
4-digit PIN) +
Enter the default PIN
“ 1–2–3–4 ” OR your new
4-digit PIN for setting
followed by
The panel will display the below image:
3
Press then to
enter the Remote Control
Deleting mode. Then input
the ID no. of the Remote
Control you wish to delete
from the system
• LCD display flashes the total number of remote currently
enrolled to the system (e.g. If the panel has 3 remotes enrolled
the LCD display will flash “03”)
• Input the remote ID no. (e.g. “02”) for the remote you wish to
delete (Inputting “00” will delete all remote controls)
• LCD display will then flash the total number of remotes
enrolled after deletion(One beep indicates that the remote was
successfully deleted from the panel)
4
Press to complete
the setting
Confirm the setting and return the panel to
STANDBY
by pressing
v
. Q
ueryinG the
id n
umBer Of a
r
emOte
c
OntrOl
The ID number of a Remote Control device can be identified as follows:
Keys Description Note
1
(1234 or
4-digit PIN) +
You must be in
STANDBY
mode before
querying the ID number
of a Remote Control
from the Wireless Alarm
Panel
*To make sure you are in STANDBY mode:
- Enter the default PIN “ 1–2–3–4 ” OR your new 4-digit PIN
- Press
- The panel will display the below image while you are in
STANDBY
mode:
(One beep indicates that you entered a valid PIN, three beeps indicate
that an invalid operation was performed).
2
(1234 or
4-digit PIN) +
Enter the default PIN
“ 1–2–3–4 ” OR your new
4-digit PIN for setting
followed by
The panel will display the below image: