MACE XCi Product Manual
Product Support
Should you experience difficulty in using this product, please contact your
local MACE vendor. We also welcome feedback from customers who feel that
their experience may provide an improvement to the product or may be
beneficial to other users.
NOTE: MACE strongly recommends that users register for Software
Updates on the “Support” page of the www.macemeters.com
website. Releases of product enhancements occur periodically and we
recommend that these are uploaded into your XCi device.
Please go to
www.macemeters.com
Disclaimer
No warranties of any nature are extended by this document.
Measuring and Control Equipment Co. Pty. Ltd. (MACE) will not accept any financial or other responsibility that may be the result
of your use of this information, including direct, indirect, special or consequential damages.
You must be careful to ensure that the use of this information complies with the laws, rules and regulations of the jurisdictions
with respect to which it is used. MACE assumes no responsibility for personal or property damage caused by the misuse of this
equipment.
Copyright
Information in this document is subject to change without notice. The software described in this document is furnished under
a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of
those agreements. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or any
means electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use
without the written permission of Measuring & Control Equipment P/L.
Copyright © 1996-2011. MACE P/L. All rights reserved.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
WARNINGS
Water damage
MACE recommends that the XCi device be mounted above known flood peak
levels. MACE will not be liable for damage caused by flooding. (The unit is
weatherproof, but NOT waterproof and should NOT be submerged).
Sunlight
MACE recommends that the XCi device be mounted so that the LCD faces in a
direction away from direct sunlight (ie South in the Southern Hemisphere and
North in the Northern Hemisphere).
Cable damage
MACE recommends that all cables be appropriately routed through electrical
conduit or other similar mechanism. MACE will not be liable for damage to
cables, especially if it is caused by vehicles, digging implements, animals or
debris in the pipe or channel.
Insects and moisture
After the XCi system has been installed and fully tested, MACE recommends
the use of expanding “space filler” foam down the first 5 to 10cm (2 to 4 “) of the
conduit or mounting pole to prevent insect/moisture ingress.
Battery life
Care must be taken when a mains power supply is used to charge the internal
battery instead of a solar panel. If the mains power remains disconnected for an
extended period of time, the internal battery may be permanently damaged.
Electromagnetic compatibility (EMC)
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Intrinsic Safety
The XCi is NOT an intrinsically safe instrument and should not be installed in
hazardous (explosive) environments. Should an intrinsically safe instrument be
required, MACE can offer other instruments with this approval level.
MACE
XCi
PRODUCT MANUAL
MACE
XCi
PRODUCT MANUAL
