MacDon R85, Руководство по сборке

Страница: 54 / 122

214367
46
Revision A
1015851
A
B
Figure 3.87: HPT Display
NOTE:
If not prompted by the HPT display to remove header
float, remove header float manually by doing the
following:
3. Press rotary scroll knob (A) on Harvest Performance
Tracker (HPT) to highlight QuickMenu options.
4. Rotate scroll knob (A) to highlight HEADER FLOAT
symbol (B), and press scroll knob to select.
1019607
A
Figure 3.88: HPT Display
5. On Float Adjust page, press soft key 3 (A) to remove
the header float.
NOTE:
If the header float is active, the icon at soft key 3 will say
REMOVE FLOAT; if header float has been removed, the
icon will say RESUME FLOAT.
1018911
A
B
C
D
E
F
Figure 3.89: GSL
A - Reel Down B - Reel Up
C - Header Tilt Down D - Header Tilt Up
E - Header Down F - Header Up
6. Press HEADER DOWN switch (E) on the ground speed
lever (GSL) to fully retract header lift cylinders.
7. Press REEL UP switch (B) on the GSL to raise the
center-link until the hook is above the attachment pin on
the header.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.
ASSEMBLING THE HEADER