215026
32
Revision A
Hard plumbed fittings
–
rotary disc ready configuration:
1028532
A
B
C
D
E
F
G
Figure 3.29: Hard Plumbed Connections on R216 SP
Ready Windrower
10. Connect the hydraulic hoses to the windrower with hard
plumbed fittings as follows:
a.
Connect disc pressure hose (A) marked with a red cable
tie (B) to hard plumb fitting marked with a red cable
tie (C) and torque to 205
–
226 Nm (151
–
167 lbf·ft).
b.
Connect disc return hose (D) to hard plumb fitting (E)
and torque to 205
–
226 Nm (151
–
167 lbf·ft).
c.
Connect case drain hose (F) to fitting (G).
11. To connect electrical harness, refer to Steps
to
Quick coupler fittings
–
rotary disc ready configuration:
1030607
A
A
B
C
D
E
Figure 3.30: Hydraulic Fittings
12. Connect hydraulic fittings to the hydraulic hoses as follows:
a.
Attach 90° elbow fitting (A) and 1 in. female coupler
fitting (B) to disc pressure hose (C).
b.
Attach 90° elbow fitting (A) and 1 in. male coupler
fitting (D) to disc return hose (E).