214075
64
Revision A
7.10
Checking Forming Shield Deflector Position
The position of the side deflectors controls the width and placement of the windrow. To ensure windrow placement
is centered with respect to the self-propelled windrower, set both side deflectors to the same position.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator’s seat for any reason.
Figure 7.22: Forming Shield Side Deflector
1.
Loosen the locking handle (A).
2.
Slide the adjuster bar (B) along adjuster plate (C) to the
desired deflector position, and engage the bar (B) into a
notch in the adjuster plate.
3.
Tighten locking handle (A).
4.
Repeat for other side.
