215634
44
Revision B
3.3
Installing Wheel Legs
The right and left wheel legs are large components that must be installed before assembling the windrower any further.
DANGER
The wheel leg assemblies are heavy and difficult to maneuver. Use a proper lifting device. Falling wheel leg assemblies
can result in serious personal injury.
CAUTION
Two people are required for this task: One person operates the lifting device while the other person helps to control
the movement of the wheel leg assembly.
1026727
B
B
C
D
A
Figure 3.8: Wheel Leg Pins
1.
Remove inboard leg bolt, nut, two caps, and pin (A). Retain
these parts for installing the wheel leg.
2.
If the windrower was lifted onto the assembly stands with
a forklift:
Retrieve outboard leg bolt, nut, two caps, and
pin (B) that was removed previously. Proceed to Step
3.
If the windrower was lifted onto the assembly stands with
a crane:
Remove outboard bolt, nut, two caps, and pin (B).
Retain these parts for installing the wheel leg.
4.
If the windrower was lifted onto the assembly stands with
a crane:
Remove and discard carriage bolt (C) and lifting
plate (D).
1026725
A
Figure 3.9: Wheel Leg
5.
Remove the shipping material from the hydraulic and
electrical bundle on the wheel leg.
6.
Attach lifting strap (A) to the top of the wheel leg, and use
a suitable lifting device to stand it upright.