PRE-DELIVERY CHECKS
169558
Revision
D
49
NOTE
One turn of the adjuster screw (B) will
change the knife speed by
approximately 116 strokes per minute,
or the sickle drive box pulley speed by
58 revolutions per minute.
4. Once adjustment has been made, re-torque
jam nut (A) as shown on previous page.
5. Close hood, start engine, and re-check knife
speed.
j. For windrowers
NOT EQUIPPED
with the
Optional Sensors Expansion Module
MD #B4666:
1. Check sickle drive box pulley speed with a
hand-held tachometer.
2. Multiply the rpm reading by two for the knife
speed in strokes per minute.
3. Compare reading to the table on the
previous page.
4. If required, adjust knife speed. See step i. on
previous page.
L. MANUALS
a. The following manuals should be stored in the
manual storage compartment behind the
Operator’s seat:
•
M105 Self-Propelled Windrower
Parts Catalog - see below.
•
M105 Self-Propelled Windrower Operator’s
Manual - see below.
•
Engine Manual - MD #166240.
•
M105 Windrower Quick Card - MD #169570.
•
Warranty
documents.
Windrower
Operator’s
manual
Parts catalog
MacDon
MD #169552
MD #169549
Westward
MD #169554
MD #169550
M. CAB INTERIOR
a. Remove plastic coverings from console, and
seats after pre-delivery check is complete.