147867
37
Revision J
1019220
A
B
C
Figure 3.58: Windrower Selection
17. Select Bluetooth
®
(A) in the IQANsync app. The app will
scan for available windrowers.
NOTE:
If connection problems are encountered or the SELECT A
MACHINE area does not populate, refer to
Firmware on an IQAN G11 Bluetooth
.
18. Select your windrower (B) and tap CONNECT (C).
19. A message appears, asking if you want to update your
windrower. Tap YES. A warning will appear asking you to
check that the windrower is in park and the engine is
turned off.
20. Check that the engine is OFF, the ignition key is in ACC
position, and the windrower is not moving, then select OK
to start the update. A SENDING TO MODULE screen
appears.
IMPORTANT:
Decline all phone calls while the update is in progress and
stay in range of the IQAN G11 Bluetooth
®
Module in the
cab headliner. Accepting phone calls or walking out of range
interrupts the update causing you to start again.
21. When the update is complete, a SYSTEM UPDATED screen
appears. Tap OK.
1016204
A
B
C
D
Figure 3.59: Ignition Switch on Console
A - ACC
B - OFF
C - RUN
D - START
22. Turn windrower key to the OFF position (B).
23. Turn windrower key to ACC position (A).
