147867
13
Revision J
1027659
A
B
Figure 3.14: Software Selection Page
A - Software File(s)
B - Currently Installed Software
Version
15. Use the scroll wheel to select the software file from list (A),
and then press soft key 1 on the top right corner of the
display to accept it. The software update should begin and
take approximately 5 minutes but can take up to
10 minutes to complete.
IMPORTANT:
Do
NOT
remove the USB drive, turn the key from the ACC
position, or activate any ground speed lever (GSL) or
console switches during the update.
NOTE:
List (A) will display all the HPT software file saved in
the USB. List (B) will display current installed version.
1020093
Figure 3.15: Green Eject Icon
16. When the update is complete, a green eject icon appears
on the display. Remove the USB drive and leave the key in
ACC position. The display reboots several times until the
home page is displayed. It is then safe to continue.
