147867
7
Revision J
Chapter 3:
Installation Instructions
3.1
Formatting USB Drive for Software Installation
A USB drive with a maximum of 32GB is required. To minimize software installation errors, format your USB drive before
downloading any software updates onto the device.
NOTE:
This procedure shows Windows 7 operating system to format the drive.
1022426
A
B
Figure 3.1: Windows 7 AutoPlay Dialog Box
1.
Plug a USB drive into a laptop or PC. An AutoPlay
window (A) will appear. Click OPEN FOLDER TO VIEW
FILES (B).
If the AutoPlay window does not appear, proceed to Step
. If the AutoPlay window appears, proceed to Step
.
1022427
A
B
Figure 3.2: Windows 7 AutoPlay Dialog Box
2.
If the AutoPlay window does not appear, do the following:
a.
Click on START then COMPUTER (A).
b.
Double click on the USB drive (B) to open it.
3.
If there are files on the USB drive that require saving, move
them to another USB drive or to the computer being used.
Close the USB drive window.
NOTE:
Formatting the USB drive will permanently erase all
content.
