![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672254.webp)
169441
242
Revision D
Interval
Service
First use
4.12.1 Break-in Inspection, page 241
100 hours or annually
3
•
Check the wobble box mounting bolts
•
Check the wobble box lubricant level
•
Check the knife drive belt tension
•
Check the torque on the stabilizer/transport wheels (if installed)
•
Check the reel tine to cutterbar clearance
•
Check the reel drive chain tension
•
Grease the reel drive chain
•
Lubricate the hydraulic couplers
End of season
3.22 Storing the Header, page 111
10 hours or daily
4
•
Check hydraulic hoses and lines for leaks
•
Check tire pressure of stabilizer/transport wheels (if installed)
•
Check knife sections, guards, and hold-downs
•
Oil knife (except in sandy conditions)
25 hours
•
Grease the knife head
50 hours
•
Grease the knife drive shaft bearings (double-knife headers only)
•
Grease the draper roller bearings
•
Change the knife drive box lubricant (first 50 hours only)
•
Grease all upper cross auger grease points
250 hours or annually
•
Grease the transport axle pivot bushings (if installed)
•
Grease the double-reel U-joint (double-reel headers only)
500 hours or annually
•
Grease the stabilizer/transport wheel hub bearings (if installed)
•
Grease the reel shaft bearings.
1000 hours or 3 years
•
Change the knife drive box lubricant
3.
It is recommended that annual maintenance be done prior to the start of the operating season.
4.
Whichever occurs first.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......