![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672253.webp)
169441
241
Revision D
4.12
Maintenance Requirements
Regular maintenance is the best insurance against early wear and untimely breakdowns.
Periodic maintenance requirements are organized according to service intervals.
When servicing the machine, refer to the appropriate section in this chapter and use only the fluids and lubricants specified
in Recommended Fluids and Lubricants on the inside back cover.
Log hours of operation, use the maintenance record, and keep copies of your maintenance records (refer to
Maintenance Schedule, page 241
CAUTION
Carefully follow safety messages. Refer to
4.1 Preparing Machine for Servicing, page 113
and
.
4.12.1
Break-in Inspection
Break-in inspections involve checking belts, fluids, and performing general machine inspections for loose hardware or other
areas of concern. Break-in inspections ensure that all components can operate for an extended period without requiring
service or replacement.
Inspection
Interval
Item
Refer to
5 hours
Check for loose hardware.
Tighten to required torque.
7.2 Torque Specifications, page 268
5 hours
Check knife drive belts tension.
Periodically check for first 50 hours.
•
Tensioning Timed Knife Drive Belts, page 160
•
Tensioning Untimed Knife Drive Belts, page 157
10 hours
Check knife drive box mounting bolts.
Checking Mounting Bolts, page 173
50 hours
Change knife drive box lubricant.
Changing Oil in Knife Drive Box, page 179
4.12.2
Maintenance Schedule
Maintenance requirements are organized according to service intervals.
If a service interval specifies more than one timeframe, for example, "100 hours or annually", service the machine at
whichever interval is reached first.
IMPORTANT:
Service the machine more often if operating under adverse conditions (severe dust, extra heavy loads, etc.).
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......