![background image](http://html1.mh-extra.com/html/macdon/b6604/b6604_installation-instructions-manual_3192443003.webp)
Introduction
The Auger Header Reel Speed Control kit (MD #B6604 or 318001) is required to provide the variable reel speed
function on the A40DX and A40DX Grass Seed (GSS) Header. This document explains how to install the kit.
A list of parts included in this kit is provided in Chapter
.
Installation Time
This kit will take approximately 1 hour to install.
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position. The front of the header is the side that faces the crop;
the back of the header is the side that connects to the windrower.
•
Unless otherwise noted, use the standard torque values provided in the auger header operator
’
s manual and
technical manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version of this instruction can be downloaded from
our Dealer-only site (
) (login required).
NOTE:
This document is currently available in English only.
214679
i
Revision B