UNLOADING AND ASSEMBLY
169078
37
Revision E
STEP 19. LUBRICATE HEADER
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose or broken fittings
immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
f. Refer to illustrations on following pages for
lubrication points.
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base.
AUGER SHAFT BEARING - 1 PLC
REEL SHAFT BEARING - 1 PLC
A30-S HEADER RH SIDE
Содержание A30-S
Страница 55: ...NOTES 169078 53 Revision E ...