UNLOADING AND ASSEMBLY
169078
17
Revision E
g. Set forming shield side deflectors to desired
width by re-positioning adjuster bars (F). Use
the same hole location on both sides.
Position deflectors at the narrowest
setting for a narrow windrow (silage for
example).
Position deflectors at the widest position
for a wide window.
NOTE
Refer to the Operator’s Manual or Quick
Card for additional information on
adjusting the forming shield.
h. Adjust fluffer shield (G) to middle position.
Loosen handles (H) if required.
BOTH SIDES
G
H
F
Содержание A30-S
Страница 55: ...NOTES 169078 53 Revision E ...