Instruction Manual
MAN-070
9
www.macmedical.com
Work Tables with Electronic Adjustable Height Option - Control Panel Setup and Operation
At the first power-on, follow these steps:
Note:
US customers will see the values in the display in terms of US inches. European customers will see display
values in terms of EU Centimeters.
1. First start up
a.
The display will initially flash “027” (US) or “068” (EU).
b.
Press the “Down” arrow button (see illustration above) until the lower US:36”/EU:91cm end position is
reached, checking with a tape measure
c. The table moves down with half speed. Moving up is not possible.
d.
Adjust the read out in US inches/ EU centimeters to reflect the actual height with the “1” button (plus)
and the “2” button (minus).
e. Moving up or down is not possible.
f.
Press the “S” (green button) to confirm.
g.
After the confirmation the display will flash US:”036”/EU:”091”.
h.
Use the “Up” arrow button to move to the upper us:43”/EU:109cm upper limit, checking with a tape
measure.
i. The table will move at half speed and half power.
j.
Adjust the read out in US inches/ EU centimeters to reflect the upper position with the “1” button (plus)
and the “2” button (minus).
k.
Confirm with the “S” button.
l.
After confirmation the display will flash “109”.
m.
After the confirmation the height is shown and the Control Box is ready for normal operation.
2. Operation up / down
a.
Press the “Down” arrow button or the “Up” arrow button until the desired height of the table has been
reached.
b. The display always shows the actual height in US inches or EU centimeters
c. The table moves as long as the key is pressed, or until the end position is reached.
Fig. 9: Memory Control Keypad
