Instruction Manual
MAN-027
41
www.macmedical.com
Cleaning Instructions for the Water Gun
•
The Black Grip on the Water Gun must be cleaned only with warm water and a mild
detergent.
•
It is not necessary to perform quality checks on the water supply, but when using
the Water Gun for water applications, the user should not use demineralized water.
Demineralized water will cause corrosion inside the Water Gun body.
•
The supplier recommends the user decalcify the Water Gun approximately every four (4)
weeks to prevent the build-up of calcium deposits.
•
The supplier recommends the user decalcify the Water Gun by submerging it in a
decalcifying agent approximately every four (4) weeks to prevent the build-up of Calcium
deposits. This will extend the life and operation of the Spray Water Gun. Decalcifying
agents can include Distilled White Vinegar, CLR, etc.
For cleaning with Distilled White Vinegar, disconnect the water gun from the hose
and submerge the gun in a bowl filled with 1:1 mixture of Distilled White Vinegar
and warm water. Leave to soak for 30 minutes. Remove the Water Gun and rinse off
with cold water. Reattach the water gun to the water supply hose and operate the
gun for 30 seconds to rinse out the interior components of the gun.
For cleaning with CLR, disconnect the water gun from the hose and submerge the
Water Gun in 1:1 mixture of CLR and hot water. Leave in CLR for two minutes,
remove, and then rinse the exterior with cold water. Reattach the water gun
to the water supply hose and operate the gun for 30 seconds to rinse out the interior
components of the gun.
Note:
When using CLR or other harsh chemical cleaners, refer to the manufacturer’s
instructions for proper handling, use and disposal of such cleaners.
