Instruction Manual
MAN-027
20
www.macmedical.com
STEP #3 - Assemble and Install Wall Bracket
8.
Screw off to remove pre-installed
bracket from support rod.
9.
Determine correct length of support
rod from wall to riser pipe. Cut rod to
approximate size with appropriate
tool.
10.
Screw on to install NEW black bracket
(supplied) onto support rod.
11.
Determine position of wall bracket
base (wall bracket base is mounted
12” from top of backsplash with sink
at it’s lowest position and centered
to riser pipe)
10
8
9
12”
RISER PIPE
SINK
BACKSPLASH
WALL BRACKET
BASE
11
