Mac allister SOLO MLM3637-Li Скачать руководство пользователя

Страница: 7 / 40

Getting

started...

MLM3637-Li

by MacAllister

Safety warnings for battery pack

Recharge the battery pack only with the charger

specified by the manufacturer.

A charger that is

suitable for one type of battery pack may create a risk of

fire when used with another battery pack.

Use the product only with specifically designated

battery pack.

Use of any other battery packs may

create a risk of injury and fire.

When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

Under abusive conditions, liquid may be ejected

from the battery pack; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally see medical help.

Liquid

ejected from the battery may cause irritation or burns.

Do not use battery pack that is damaged or

modified.

Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

Do not expose a battery pack or tool to fire or

excessive temperature.

Continuous intense sunlight,

fire or other heat sources may cause an increased

danger of explosion.

Batteries can explode in the presence of a source

of ignition, such as a pilot light.

To reduce the risk of

serious personal injury, never use any cordless product

in the presence of an open flame. An exploded battery

can propel debris and chemicals. If exposed, flush with

water immediately.

Follow all charging instructions and do not charge

Safety information

Содержание SOLO MLM3637-Li









































Результаты поиска

Содержание SOLO MLM3637-Li

Отзывы:

Похожие инструкции для SOLO MLM3637-Li

Бренды по названию

Популярные бренды

Mac allister SOLO MLM3637-Li, Руководство пользователя

Результаты поиска

Содержание SOLO MLM3637-Li

Отзывы:

Похожие инструкции для SOLO MLM3637-Li

Бренды по названию

Популярные бренды