Mac allister SOLO MLM3637-Li, Руководство пользователя

Страница: 16 / 40

EN
16
Getting
started...
MLM3637-Li by MacAllister
You will need
Assembly
(items not supplied)
Suitable personal protective equipment
Suitable wrench
(items supplied)
Grass catcher (6)
Cutting blade (12d)
Mulching insert (21)
Battery pack (22)
Charger (23) and its manual
NOTE: The accessories required depend on the intended application.
Ask your dealer for advice.
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to battery pack (22) before it is completely
assembled!
Handle assembly
The handle assembly of the upper handle bar (4) and the lower handle bar (7)
is pre-installed on the transport handle (8).
1. Unfold and loosen the clamp levers (9) anti-clockwise on the lower handle
bars (7), but do not remove them (Fig.1, step 1).
2. Hold the grip handle (2) with one hand and unfold the handle assembly
(Fig. 1, step 2). Make sure that the inter-connection cord (19) run on the
upper side of the upper handle bar (4) and the lower handle bar (7).
3. Secure the handle assembly by folding up the clamp lever (9) towards the
transport handle (8). If clamp lever (9) cannot be folded, loosen it and fold
again. If it is too loose, tighten it by turning the clamp lever (9) clockwise
(Fig. 2).
Before you start