34
11
Side discharge attachment
• Lift and hold the locking buckle (16a) upwards to disengage it.
•
hang it onto (Figs. 27, 28).
Fig. 27
Fig. 28
1
2
3
4
5
6
7
29
16
16a
1
2
3
4
NOTE:
When using the side discharge function, the grass
clippings are discharged and spread across the ground.
the product.
12
Cutting height adjustment
Adjust the cutting height according to the needs of your lawn. The cutting height depends on the kind of lawn and its actual height.
When mowing high grass, start with the maximum cutting height and make a second cut with lower cutting height. New or thick
grass may require a higher cutting height and a narrower cutting path.
• Pull the lever (19) towards the wheel (13), and then move it forward or backward to the desired cutting height.
• Release the lever (19) and ensure it engages into place properly (Fig. 29).
Fig. 29
1
2
3
4
5
6
7
1.
2.
19
13
WARNING!
Ensure that the lever engages between two of
the prongs!
Switch the engine off and wait until the blade had come to a
complete stop before adjusting the cutting height!
35
13
Mowing
• Make sure that the lawn is clear of stones, sticks, wire or other objects that could damage the product or its engine.
• Do not cut wet grass because it tends to stick to the underbody of the product, preventing the proper discharge of grass clippings,
and it could also cause you to slip and fall.
• Never cut off more than one-third of the total length of the grass for a healthy lawn. In the autumn, lawns should only be cut as
long as there is growth.
• Slowly push the product forward.
• Mow in slight overlapping rows. The most effective pattern for mowing lawns is straight lines along
one of the sides. This will keep the rows even and ensures that all the lawn is cut without missing
any spots (Fig. 30).
•
two around the circumference of the bed.
• Pay special attention when changing direction.
• Empty the grass catcher regularly.
• Prepare the product according to required application.
Function
Grass catcher
Mulching insert
Side discharge attachment
Grass collection
attached
removed
removed
Mulching
removed
inserted
removed
Side discharge
removed
inserted
attached
14
After use
• Switch the product off, disconnect the spark plug connector / remove the battery pack and let it cool down.
• Check, clean and store the product as described below.
Fig. 30
