38
39
MLMP450HP40 By MacAllister
MLMP450HP40 By MacAllister
In
more
detail
. . .
In
more
detail
. . .
NOTE:
Replace this cutting device after
50
hours mowing or
2
years whichever
is sooner regardless of condition. If the cutting device is cracked or damaged,
you must immediately replace it with a new one.
6. Lubricate the cutting device (23) after each use to prolong the life span of cutting device
and product. Apply light machine oil along the edge of the cutting device (Fig. 21).
23a
23b
23c
23d
23
23e
23f
Fig. 21
Grass catcher
1. Inspect the grass catcher (20)
2. Clean the grass catcher (20) after operation using water and mild soap.
3. Let the grass catcher dry thoroughly before storing to avoid mildew.
Wires
Check the performance of the wires (4)
adjust it if necessary.
WARNING!
Do not use the product with defective or loose wires!
Engine
NOTE:
An instruction manual of the engine is provided with your product. Follow
the engine handbook for maintenance and care for of engine.
Care and maintenance
Refer to the B&S operator’s manual for maintaining below parts:
>
>
Spark plug
>
Fuel
>
Engine oil
>
Carburettor
>
>
Valve play
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description
Blade
DAYE 26300100401
Repair
This product does not contain any parts that can be repaired by the consumer. Contact an
Storage
1. Switch the product off and disconnect the spark plug connector.
2. Clean the product as described above.
3. Store the product and its accessories in a dry, frost-free place.
4. Always store the product in a place that is inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
5. We recommend using the original package for storage or covering the product with
a suitable cloth or enclosure to protect it against dust.
6. Empty the tank if you are not going to use the product for an extended period of time
(more than 30 days) and before storing it for the winter.
Transportation
1. Switch the product off and disconnect the spark plug connector.
2. Adjust the height to the highest position as described above.
3. Attach transportation guards, if applicable.
4. Always transport the product by its handle (1).
5. Protect the product from any heavy impact or strong vibrations which may occur
during transportation in vehicles.
6. Secure the product to prevent it from slipping or falling over, loss of fuel, damage
and injury.
Care and maintenance