32
33
MLMP450HP40 By MacAllister
MLMP450HP40 By MacAllister
In
more
detail
. . .
In
more
detail
. . .
Starting/Stopping
WARNING!
Clean the underside of the deck!
Keep yourself ready! Start the engine carefully according to instructions. Keep
your feet well away from the blade!
Do not tilt the product when starting the engine.
Start
1. Press the primer
(10)
18
, step
1
).
2. Stand behind the handle
(1)
.
3. Pull the brake bar
(2)
against the handle
(1)
and hold it in position with one hand
(Fig.
18
, step
2
).
4. Pull the recoil starter handle
(22)
lightly until you feel resistance then pull it rapidly.
Do it again until the engine starts (Fig.
18
, step
3
).
5. When you are ready to mow, hold the brake bar
(2)
with both hands with the handle
(1)
. Pushing the mower forward and the mower begins mowing.
10
1
2
22
Fig.
18
WARNING!
The starting position should be as described in the instruction
behind the lever. DO NOT start the engine standing beside the deck as (Fig B).
Fig.
A
Fig.
B
Stopping
Release the brake bar
(2)
to stop the engine and blade (Fig.
19
).
Fig.
19
Mowing
1. Make sure that the lawn is clear of stones, sticks, wire or other objects that could
damage the product or its engine.
2. Do not cut wet grass because it tends to stick to the underbody of the product,
preventing the proper discharge of grass clippings, and it could also cause you to
slip and fall.
3. Never cut off more than one-third of the total length of the grass for a healthy lawn.
In the autumn, lawns should only be cut as long as there is growth.
4. Slowly push the product forward. You may want to use the self- propelled function
for assistance.
Operation
Operation
