22
23
MLMP450HP40 By MacAllister
MLMP450HP40 By MacAllister
Getting
Started . . .
Getting
Started . . .
Getting
Started . . .
Getting
Started . . .
Before you start
WARNING!
3. Always dispose of fuel, used oil and objects contaminated with them in accordance
with local regulations.
Fuel
NOTE:
This product is not supplied with fuel! Before operating this product it
with petrol!
1. Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be
used within
30
days.
2. Avoid getting dirt, dust or water in the fuel tank.
3. Unscrew and remove the fuel tank cap
(8a)
(Fig.
8
).
4. Add correct fuel into the tank. Leave a minimum
5
mm of space between the top of
the fuel and the inside edge of the tank to allow for expansion (Fig.
9
).
8a
15
5 mm
Fig.
8
Fig.
9
NOTE:
you use petrol which has been kept for more than
30
days.
Towards the end of the season, it is advisable to put only as much fuel in the
tank as you need for each use, since it should be completely used up before
storing the product.
Always empty the fuel tank when storing the product for over 30 days.
5. Wipe any spilled fuel with a soft cloth and reattach the fuel tank cap
(8a)
.
Engine oil
WARNING!
This product is not supplied with oil. However, for manufacturing
reasons it is possible that a small quantity may be in the engine! Before operating
handbook
(26)
!
1. Unscrew and remove the oil tank cap
(15)
.
2. Gradually add good-quality engine oil. Allow the oil to settle.
3.
min
”
and “
max
” marking, indicated by the two arrows. Add more oil if necessary. Do not
10
).
Fig.
10
4. Wipe spilled oil with a soft cloth and reattach the oil tank cap
(15)
.
Before you start
