Mac allister MLMP300HP46, Оригинальное руководство пользователя

Страница: 21 / 28

21
Product cleaning
To keep the product clean please follow the following instructions:
1. Keep the product clean. Remove debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
3. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts.
01
General cleaning
1. Clean the product with a slightly damp cloth and mild soap. Use a brush for areas that are hard to reach.
2. In particular, clean the air vents (8) after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air (max 3 bar).
4. Check for worn or damaged parts. Replace worn parts as a necessary or contact an authorised service centre for repair before
using the product again.
WARNING! Always switch the product off, disconnect the
spark plug connector and let the product cool down before
performing inspection, maintenance and cleaning work!
DO NOT touch a rotating blade.
WARNING! Only perform repairs and maintenance work
according to these instructions! All further works must be
performed by a qualified specialist!
WARNING! Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product as
they might be harmful to its surface.