manualshive.com logo in svg

Mac allister MLM1334, Оригинальное руководство пользователя

Поделиться
Скачать
Mac allister MLM1334 Скачать руководство пользователя страница 27

EN

27

In 

more

 detail...

MLM1334

 by MacAllister

General Cleaning

Spare parts / Replacement parts

Underbody and cutting blade

3.  Check for any damage and wear. Repair damages in accordance with this 

instruction manual or take it to an authorised service centre before using the 

product again.

1.  Keep the underbody and cutting blade (12c) clean and free of debris. Remove 

clippings from the rear discharge chute (18).

2.  Check all fasteners, such as nuts and bolts, periodically for tightness before 

operation. After prolonged use, especially in sandy soil conditions, the cutting 

blade will become worn and lose some of the original shape. The cutting 

efficiency will be reduced and the cutting blade should be replaced.

3.  Keep the cutting blade (12c) sharp to ensure a good cutting performance. 

Replace a worn or damaged cutting blade with a new one of the same type or 

have it sharpened by a qualified specialist.

4.  Loosen the hex nut (12d) anti-clockwise using a suitable wrench (Size 17 mm) 

and remove it together with the cutting blade (12c) (Fig. 17).

NOTE: 

Do not use chemical, alkaline, abrasive or other aggressive 

detergents or disinfectants to clean this product as they might be 

harmful to its surfaces.

The following parts of this product may be replaced by the consumer. Spare 

parts are available at an authorized dealer or through our customer service.

WARNING! 

Wear safety gloves when working on the blade and close

to it! Use proper tools to remove debris, e. g. a wooden stick! Never

use your bare hands!

Always use original spare parts for replacement. The cutting blade

must be replaced by an identification no. ref. A056017800. Do not

attach any other type of cutting blade!

The replacement of the cutting blade should be done by a qualified

specialist! Rework or sharpening blades is not recommended unless 

it is done by a repair service or a similarly qualified specialist!

Care and maintenance

Содержание MLM1334









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды