manualshive.com logo in svg

Mac allister MLM1334, Оригинальное руководство пользователя

Поделиться
Скачать
Mac allister MLM1334 Скачать руководство пользователя страница 18

EN

18

Getting

 started...

MLM1334

 by MacAllister

Connection to power supply

1.  Double the power cord (4) back, about 60 cm from the power guard and lead 

the loop through the slots of cord retainer (2a) (Fig. 8).

2.  Pull it over the cord retainer (2a) and gently tug on the power cord (4) to 

ensure that it is firmly secured (Fig. 9).

3. Connect the plug of power cord (4) with a suitable socket.

4. Your product is now ready to be used.

Before you start

WARNING! 

Check the voltage! The voltage must comply with the

information on the rating label!

If using an extension cord it must be suitable for outdoor use with

sockets protected against water splashing.

Ensure the extension cord is of the proper size and type for your

product:

· 1.5 mm

2

 for up to 60 m

· 2.5 mm

2

 for up to 100 m

NOTE: 

The product is equipped with a power cord with the length of 10

m. If a proper extension cord is required for operation. The extension

cord must be suitable for outdoor use with sockets protected against

water splashing! Ensure the extension cord is of the proper size and

type for your product (≥ 1.0 mm²)!

Always use a residual current supply (RCD) protected supply.

4

2a

1.

Fig. 8

4

2a

2.

Fig. 9

Содержание MLM1334









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды