manualshive.com logo in svg

Mac allister MLM1334, Оригинальное руководство пользователя

Поделиться
Скачать
Mac allister MLM1334 Скачать руководство пользователя страница 26

EN

26

In 

more

 detail...

MLM1334

 by MacAllister

After use

The golden rules for care

General Cleaning

1.  Switch the product off, disconnect the plug from the power supply and let it 

cool down.

2.  Check, clean and store the product as described below.

1.  Keep the product clean. Remove debris from it after each use and before 

storage.

2.  Regular and proper cleaning will help ensure safe use and prolong the life of 

the product.

3.  Inspect the product before each use for worn and damaged parts. Do not 

operate it if you find broken and worn parts.

1.  Clean the product with a dry cloth. Use a brush for areas that are hard to 

reach.

2.  Remove stubborn dust with high pressure air (max. 3 bar).

WARNING! 

If the product strikes a foreign object stop immediately! Let 

the product cool down and thoroughly inspect the product for damage!

Have any damage repaired before restarting!

Extensive vibration of the product during operation is an indication of

damage! The product should be promptly inspected and repaired!

WARNING! 

Always switch the product off, disconnect the plug from 

the power supply. Let the product cool down before performing 

inspection, maintenance and cleaning work!

WARNING! 

Only perform repairs and maintenance work according to

these instructions! All further works must be performed by a qualified

specialist!

Operation / Care and maintenance

Содержание MLM1334









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды