B
C
D
E
B
C
B
Attach the table saw to the stand
> Place the stand on a flat surface.
> Place the table saw on top of the stand, aliging the holes in the base with the
holes in the stand.
Make sure that
the front of the table saw positioned on the long side.
> Insert four hex bolts M6 x 25 [39] along with flat washers 6 [29] into the aligned
holes.
> Tighten all four hex nuts M6 [31] and hex bolts [39].
30
Before you start
MSTS1500-A
by
MacAllister
Getting
started...
EN
Fig. 7
36
37
35
35
33
36
33
34
34
4
a
b
31
30
29
38
31
30
29
38
NOTE:
Do not over-tighten the bolts that hold the saw to
the stand. Doing so will damage the saw base.
