(items supplied)
> Blade wrench (2 pcs)
WARNING: Risk of injury!
Always pull out the mains plug (disconnect the product from its
power supply) before commencing work on the product.
Fig. 1a
10
40
8
22
You will need
(items not supplied)
> Phillips screwdriver
> 10mm Wrench or adjustment wrench
> 4mm Hex key
> Square
> Triangle square
To assemble the left & right
extension tables
> Place cardboard or an old blanket on floor in order to protect the surface of the
working table.
> Carefully remove the table saw assembly from the carton.
> Place the table saw assembly upside down on the protective material. Unlock
the bevel locking handle [10] anti-clockwise, turn the bevel adjusting handwheel [8]
anti-clockwise to tilt the motor and remove the polyfoam [40] carefully. Lock the
bevel locking handle [10] clockwise. (Fig. 1a)
Before you start
MSTS1500-A
by
MacAllister
Getting
started...
EN
