Mac allister 3663602467571 Скачать руководство пользователя страница 9

Страница: 9 / 60

Safety instruction

GENERAL POWER TOOL SAFETY WARNINGS

Warning! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.

Failure to follow all

instructions listed below may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference!

The term

"power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.
c)

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.
b)

Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

Technical and legal

information

MSTS1500-A

MacAllister

Getting

started...

WARNING!

Reading the operating instructions will reduce the

risk of injury.

WEEE symbol. Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.

MSTS1500-A Designation of the tool (

- MacAllister,

- Table saw,

1500

- 1500W,

- Version of machine)

For your own protection and for the protection of your electrical tool, pay

attention to all parts of the text that are marked with this symbol!

Содержание 3663602467571





























































Результаты поиска

Содержание 3663602467571

Отзывы:

Mac allister 3663602467571, Руководство пользователя, Страница: 9 / 60

Результаты поиска

Содержание 3663602467571

Отзывы: