Mac Afric ML392C I, Руководство по обслуживанию

Страница: 4 / 21

3
2.2 Residual Dust
Average value of the residual dust
during workpiece feeding
Average value of the residual dust
during workpiece outfeeding
Surface planning 0.32mg
／
m
3
Press planning 0.12mg
／
m
3
Sawing 0.34mg
／
m
3
Drilling 0.15mg
／
m
3
Milling 0.46mg
／
m
3
Surface planning 0.42mg
／
m
3
Press planning 0.15mg
／
m
3
Sawing 0.38mg
／
m
3
Drilling 0.13mg
／
m
3
Milling 0.48mg
／
m
3
3 Structure
This machine is specially designed with the structure of plate combined bench type. It is very
convenient and reliable in usage and maintenance. It is mainly made up of front and back
bench, right and left bearing base
，
right and left wall board, press planing table, sawing table,
arbor, motor and driving system. The machine can be accommodated to either one phase or
three phase motor (1.5kW
／
1.1kW)
The main driving is by V-belt as chain and gear ways. The feeding of press planing is
automatically. The anti-kickback jaw guarantee the security of operation. The cutter head is
installed on the milling arbor. The milling protective device guarantee the security of milling
operation.
4 Carriage & Installment
During carriage, using lifting hook (Fig.2). To keep the machine balance, handle carefully.
Keep the machine in a wide and arid place. Fix the machine with ground bolt (see Fig.3) On
behalf of carriage, some of the parts are packed with small packing box. In this case, the
customer must mount the dismounted parts in accordance with the stages and means
showed below.
As Fig.15 showing to mount the box base.
As Fig.4 showing, mount milling part first. Fix supporter 35 on left wallboard 36 with bolt 34.
Let milling table 7 parallel with surface planing table, then insert column guide 23 into the
hole of milling table 7. Screw the bolt 28 tightly and then mount presser 11 and push presser
Press Planing
Infeed 83.0dB(A)
Max. level-LpeaK dB less than 110
Outfeed 87.5dB(A)
Max. level-LpeaK dB less than 110