Mac Afric ML392C I, Руководство по обслуживанию

Страница: 18 / 21

17
●
Mount hood 2 and fix it by screw 3 (M8
×
12 see Fig.13).
●
Make marks on workpiece before drilling, then clip the work piece on bench.
●
Adjust the height and position of bench 7 by handwheel 32 (Fig.4).
●
Operate the lateral and longitudinal handles.
Caution: During waist shape hole drilling operate the lateral handle only
●
Start the machine, stand at the left side of the machine.
Instruction for use
●
Be sure to clip the woodwell. Never clip too long woodpiece. Avoid dangerous knots.
●
Wear working clothing. Advance wood uniformly and slowly.
●
Press button 2 (Fig.14) if there is something wrong.
●
Keep the bit sharp enough.
●
At the end of work, turn-off the machine, remove the bit. Mount spindle hood.
10 V-belt tension adjustment
As shown in Fig.1, loose bolt 19
，
22
，
23 (each two pieces), rotate motor 1 around bolt 23 to
make the V-belt 24 tension lock the bolt 22, 23. Move the transfer bearing base 20 to make the
V-belt 21 tension.
Fig.15 box-type base fixing diagram
1. bolt M8
×
25 2. spacer 3. cover 4. bolt M6
×
10 5.nut 6. spacer6-140HV 7. front frame plate
8. bolt M6
×
16 9 sheet 10. door 11. base plate 12. back frame plate