Mac Afric ML392C I, Руководство по обслуживанию

Страница: 14 / 21

13
●
Adjust the press planing table 3 according to the workpiece height to be obtained. Lock the
table well after adjustment. For finishing passes, give a removal of about 1mm.
●
Insert the wood driving rollers by pulling out lever.
●
The operator should stand at the position of Fig.11.
●
At the end of work, separate the driving gears.
Instruction for use.
●
Check that the wood doesn't have cracks or dangerous knots.
●
Pass the machined part of the wood on the press planing table.
●
Don't machine too short workpieces, the min. length is 150mm, while for long ones use
outfeed supports.
●
Keep the knives sharp.
●
Button 1 should be positioned in position. For any sudden trouble or accident
，
press the
button 2 (Fig.14).
●
At the end of work, turn-off the machine, take the plug off the socket, clean the machine.
7.4 Sawing (Fig.12)
Fig.12 Sawing diagram
1. spindle hood 2. bridge guide supporter 3. bridge guide 4. infeed table 5. ruler base 6. lock bar 7. sawing &
planing guide 8. lock bar 9. saw cover
Blade changing
●
Turn-off the machine and take the plug off the socket, dismount saw cover, raise sawing
table, wear leather gloves, loose blade lock nut.